4 Tips for Drying Out a Commercial Building
Water Damage Tips
When your Santa Maria, commercial building suffers water incursion, whether it's from a pipe burst or act of nature, the same basic steps will have to be taken. These steps will help protect any occupants in the affected area and the building and its contents. Professionals will probably have to be called in to remedy the situation thoroughly. Still, you can follow water damage tips to begin drying out the building before help arrives. After all, the quicker drying begins, the less damage will occur.
1. Turn Off Electricity
If you can safely make your way to the breaker box, the power to the area should be turned off immediately. Never walk through standing water in which electrical items are sitting. The electricity can travel throughout the water, electrocuting you. If you can't navigate to the breaker safely, or if you're unsure, you must wait for a professional to cut the power supply.
2. Extract Standing Water
Next, all the standing water will need to be extracted. A wet/dry vacuum is excellent for doing this safely and efficiently. It will also remove smaller debris.
3. Remove Soaked Materials
After you've extracted as much water as possible, one of the most critical damage tips to follow is to remove as many wet materials as possible. This can even include drywall and flooring. Soaked carpet and padding typically aren't salvageable; it can't be dried entirely before mold growth occurs (within 24 to 48 hours). Water damage remediation experts are highly recommended, as they can bring in industrial-grade equipment.
4. Dry Remaining Contents
You can try to dry the remaining contents by opening windows and doors if the outside is less humid than inside, using dehumidifiers, running fans and turning up the heat via the HVAC system or space heaters.
If your building floods, it and its contents need to be thoroughly dried as soon as possible. These are a few damage tips and cleaning tips you can begin before professionals arrive on the scene.